Olympus: C-7000, D-535, D-395, C-60, D-540, D-580, C-5000,
C-390, D-560, C-50, C-300, D-370, D-40, D-1502, D-510, D-460,
D-490, D-400, D-450, Stylus 300, Stylus 400, and Stylus Verve.
All these models can be attached to monocular, binocular and trinocular eyetubes using the Unilink and a Linkarm. For high power compound microscopes no other adapter is needed. To attach the Unilink to one of the eyetubes of a low power stereomicroscope then a stereo insert adapter is needed.
Unilink: Price £38.30 Linkarm: Price £17.02
Stereo eyetube insert: Price £10.21
Olympus C-2500L, D-620L, D-600L, D-500L, C-1400L.
These models have a 43mm lens screw thread and will attach directly to the Unilink using a 43 - 37mm step ring. The Linkarm is not required.
Unilink: Price £38.30 Step ring 43 - 37mm Price £9.50
Olympus E-100RS, C2100UZ
These models have a 49mm lens screw thread and will attach directly to the Unilink using 2 step rings (49 -46mm and 46 - 37mm). The Linkarm is not required.
Unilink: Price £38.30 Step rings: Price £9.50 each
Olympus C-2000, C -2020, C -2040, C -2500L, C -3000, C -3020
C -3030, C -3040, C - 4000, C - 4040, C - 5050.
These models have a screw thread on the body of the camera at the base of the lens that is an external zoom type. To attach to the Unilink the Olympus CLA-5 adapter tube is required. This is a tube that allows the zoom lens to move within it and has a 43mm screw thread at its end.
Olympus CLA-5: Price £18: Unilink Price £38.30: Step ring 43 -37mm: Price £9.50
Olympus C -720UZ, C -740UZ, C -750UZ, C -765UZ, C -770UZ
For the same reasons as the group above, these need Olympus adapter CLA-4, the Unilink and 2 step rings (55 -46mm and 46 - 37mm).
CLA-4 Price £18, Unilink Price £38.30, Step rings £9.50 each.
Olympus C-5060
This model needs an adapter tube, made by Raynox to fit over the zoom lens. It will then attach to the Unilink via 2 step rings.
Raynox RT5248 Price £15: Unilink Price £38.30: 52-46 & 46-37mm step rings Price £9.50 each.
Olympus C -5050
The same as the C -5060 except that the Raynox adapter is RT5241
Olympus C -1, C -2, C -21
The lens of these cameras may be too small for the type of microscope you may have. To be sure place the lens of the camera directly against the eyepiece of your microscope. Use the zoom control to fill the field of view. If you consider the image to be satisfactory, then you need the Unilink and a Linkarm
Olympus E -20, E -10
Unfortunately the lens diameter is just to large for photomicrography
